Alaska Airlines 737 May Have Left Boeing Factory Missing Bolts, N.T.S.B. Says

Four bolts used to secure the panel that ultimately blew off an Alaska Airlines plane during a flight last month were removed — and appear not to have been replaced — at Boeing’s factory in Renton, Wash., according to a preliminary report released Tuesday by the National Transportation Safety Board.

The panel, known as a door plug, was opened to repair damaged rivets on the plane’s body, known as the fuselage. The report did not say who removed the bolts keeping the door plug in place. But the safety board said it appeared that not all the bolts were put back once the door was reinstalled on the plane after the rivets had been repaired.

As evidence, the N.T.S.B. provided a photograph of the door plug after it was reinstalled but before the plane’s interior was restored. In the image, three of the four bolts appear to be missing. The location of the fourth bolt is covered with insulation.

The report said the image had been attached to “a text message between Boeing team members on September 19, 2023.” The Boeing employees “were discussing interior restoration after the rivet rework was completed during second shift operations that day,” the report said.

The safety board said there was no evidence that the plug was opened again after it left Boeing’s factory. The plane was delivered to Alaska Airlines at the end of October.

The report intensifies the scrutiny on Boeing, which has been scrambling for weeks to contain the fallout from the incident, and it raises fresh questions about whether the company did enough to improve safety after two fatal crashes of 737 Max 8 planes in 2018 and 2019. It also answers critical questions about why the door plug detached shortly after Alaska Airlines Flight 1282 took off from Portland International Airport in Oregon.

See also  All In on Aloo Chicken

Almost immediately, the Alaska Airlines incident prompted the Federal Aviation Administration to ground some 737 Max 9 jets, snarling flight schedules for days at Alaska and United Airlines, the two U.S. carriers that fly the model.

The F.A.A. has also indefinitely limited Boeing’s ambitious plans to increase production of all Max jets, miring the company in uncertainty. The company had planned to churn out 42 jets a month this year and 50 a month next year, but it will instead hold steady at 38, possibly for many months. Boeing executives declined last week to provide a financial forecast for the year, citing the incident and a need to focus on safety.

Furious airline executives have taken the rare step of criticizing Boeing publicly and expressing doubt that it will be able to deliver the airplanes they had ordered on time.

The incident and its ripple effects have plunged Boeing, one of the world’s two largest plane manufacturers, into a familiar position: trying to navigate through a crisis with unknown financial and reputational costs. Just five years ago, after the two deadly Max 8 crashes that killed nearly 350 people, the company spent billions of dollars to make its planes safer and repair its reputation.

With the company once again on its heels, it is racing to reassure customers, regulators and members of Congress that it is focused squarely on improving quality control. Dave Calhoun, Boeing’s chief executive, visited Spirit AeroSystems, a supplier in Wichita, Kan., that makes the bodies of 737 Max planes. Boeing also held an event at which employees at the factory in Renton, where Max planes are built, halted work for a day to attend sessions about quality. And it has vowed to reward employees “for speaking up to slow things down if that’s what’s needed.”

See also  Boeing Is Said to Offer Stock in Deal for Spirit AeroSystems

But even as it tries to resolve its troubles, Boeing said on Sunday that a supplier last week had found a new problem with fuselages on dozens of unfinished 737 Max planes. The supplier found that “two holes may not have been drilled exactly to our requirements.”

Though he did not name the supplier, a spokesman for Spirit said that a member of its team had identified an issue within the past week that did not conform to engineering standards. Boeing said that the problem would force Boeing to rework about 50 planes, delaying their delivery.

On a call with analysts Tuesday, the chief executive of Spirit AeroSystems, Patrick Shanahan, said that it was increasing the number of inspections it conducted, along with the ones done by Boeing.

Also on Tuesday, Mike Whitaker, the F.A.A.’s top official, told a House panel that the agency would step up its on-the-ground presence monitoring Boeing’s aircraft production.

“Going forward, we will have more boots on the ground closely scrutinizing and monitoring production and manufacturing activities,” Mr. Whitaker told the House Transportation and Infrastructure Committee’s aviation subcommittee.

In addition to limiting Boeing’s production increase, the agency has opened an investigation into the plane maker’s compliance with safety standards. It also began an audit looking at the company’s production of the Max, which Mr. Whitaker said would take six weeks.

He said the agency had deployed about two dozen inspectors at Boeing and another half-dozen at Spirit.

Santul Nerkar contributed reporting.

Source link

Leave a Reply

Your email address will not be published. Required fields are marked *